Ultra electronic MAGICARD Sicura Laminator - Manual (Page 3)

Ultra Electronics Card Systems Quick Start Guide
MAGICARD Sicura Laminator Page 3
Location Requirements for your laminator/printer:
Preparing a Location for the
Sicura Laminator and Printer
A
•
An adequate power supply.
•
Ambient temperature +10 to +30 deg C.
• Relative Humidity 20/70% RH.
• Protection from direct sunlight and
chemicals.
• Protection from abrupt temperature
changes.
• A clean, level surface.
•
Adequate space for:
- opening the printer cover
– opening the laminator cover
– cable access at the rear and RH side
– allowance for air circulation.
•
An adequately ventilated room.