Ultra electronic MAGICARD Sicura Laminator - Manual (Page 17)

Ultra Electronics Card Systems Quick Start Guide
MAGICARD Sicura Laminator Page 17
I
Operating the Hopper/Sicura in
Stand Alone Mode
Clip the Card Feed Hopper to the end of
the Sicura card laminator and remove
the Card Deflection Plate.
Load the hopper with cards to be
laminated (100 cards maximum).
Connect the interface cable from the
lamintor. Check that the DIL Switch
selections are UP (see Section F4).
Switch on the laminator and the hopper.
The hopper will start to feed cards into
the laminator when it is READY.