Ultra electronic MAGICARD Sicura Laminator - Manual (Page 12)

Quick Start Guide Ultra Electronics Card Systems
Page 12 MAGICARD Sicura Laminator
Insert a card into the slot, side to be
laminated uppermost.
Cards should be clean, dust-free and
not already overcoated.
Adjust the IN/OUT position of the
laminate on the card by screwing the
core in or out, if necessary.
The card will be laminated in 35-
40 seconds.
The READY indicator should be off
during lamination.
ROTARY SWITCH AND DIP SWITCH
ADJUSTMENTS
The LEFT/RIGHT position of the
laminate on the card can be adjusted
by means of the rotary switch scaled 0
to F.
The second rotary switch (Spare) is not
used (future option).
DIP SWITCH SETTINGS
All switches are to be left in the UP
position except when operating the
Sicura in conjunction with a TURBO
printer, in which case Switch 1 (brown)
should be DOWN.