Ultra electronic MAGICARD Sicura Laminator - Manual (Page 13)

Ultra Electronics Card Systems Quick Start Guide
MAGICARD Sicura Laminator Page 13
Adjust the roller temperature for good
laminate adhesion as required (up to
200
°C max).
The display normally shows the roller
core temperature in
°C.
Adjust the setpoint temperature with
the
↑ and ↓ keys as desired. Press the
Scroll Key once to return to normal
operation. The SP indicator will go out.
Press the LH Scroll Key once to select
display of setpoint value. The SP
indicator will illuminate.
Keep the cover down for best results.
White cards need higher temperatures
than printed cards, for best adhesion,
as does Holographic film.