USRobotics 9003 - Manual (Page 12)

8
8
Congratulations! Installation Complete!
You’ve completed installation of the U.S. Robotics SureConnect ADSL Ethernet/
USB Router. Click
Finish. The installer will automatically launch the Internet
browser. The Internet browser will point to IP address 192.168.1.1.
At this point, the software prompts you for a username and password. The
default username is “root.” The default password is “12345.” Enter these values
(without periods or quotation marks).
If your browser doesn’t auto-launch...
Begin the Quick Setup by launching your Internet browser and entering http://
192.168.1.1. The SureConnect ADSL Utility Quick Setup screen will display.
Step 4. Use the Quick Setup Menu
The U.S. Robotics SureConnect ADSL Ethernet/USB Router comes equipped
with the SureConnect ADSL Web Utility. This utility helps you get the router set
up in three easy steps...
• Select ADSL Standard.
• Configure service provider settings.
• Save and restart.
Do not turn the power off or disturb the router
before the save operation completes. Interrupting
this process will cause the router to lose setup data.