Vision Fitness T9700 Series - Manual (Page 54)

50
GENERAL
USER ENGINEERING MODE
(Models T9700S, T9700HRT, & PREMIER Only)
Your Treadmill offers a User Engineering Mode that can access certain
data and help to troubleshoot your Treadmill. User Engineering Mode is
designed for you to access functions that will not affect important Treadmill
settings. To access this mode please hold down SPEED DOWN and
SELECT for 5 seconds while the Treadmill is in any state of setting up a
program. "USER ENG" displays in the alphanumeric window. Press SELECT.
To access the data press either set of arrow keys to scroll through the
available data/functions. To select the data/function, press and hold
SELECT. To exit, press STOP.
P6 - UNITS
P6 represents units, English or Metric. You can select this configuration for
your Treadmill.
The Treadmill configuration appears in the dot matrix. If “MI” is shown, the
Treadmill is configured in English units (miles/mph); “KM” represents a
Metric configuration (kilometers/kph). Press the SPEED arrows to toggle
between English and Metric.
In order to save the modified value, press and hold SELECT. Note that
changing units does affect the stored value of weight and clears any
stored user programs. Changing units may also require you to perform
auto-calibration.
P7 - MAX TIME
P7 represents maximum time. You can modify the time by using either set
of arrow keys. Press and hold SELECT to enter.
P8 - DEFAULT WEIGHT
P8 represents default weight. Weight appears in the alphanumeric
window. To modify weight, press the SPEED arrow keys. To save the new
default weight, press SELECT prior to exiting. If Units is modified immediately
prior, weight defaults to 150 lbs. or 68 kg.