Vision Fitness T9700 Series - Manual (Page 56)

P19 - DECK LUBRICATION MESSAGE ( T9700S & T9700HRT ONLY)
P19 represents whether the service message for deck lubrication has been
enabled. If enabled, a "1" appears in the alphanumeric display.
Otherwise, a "0" appears if disabled.
To disable the message, you must press one of the SPEED keys so that a
"0" appears in the right window. Then press SELECT to save prior to exiting.
To exit, press STOP.
P20 - CLEAN TREADMILL MESSAGE ( T9700S & T9700HRT ONLY)
P20 represents whether the service message for clean treadmill has been
enabled. If enabled, a "1" appears in the alphanumeric display.
Otherwise, a "0" appears if disabled.
To disable the message, you must press one of the arrow keys so that a
"0" appears in the right window. Then press SELECT to save prior to exiting.
To exit, press STOP.
P21 - CHECK MOTOR BRUSHES MESSAGE ( T9700S & T9700HRT ONLY)
P21 represents whether the service message for check motor brushes has
been enabled. If enabled, a "1" appears in the alphanumeric display.
Otherwise, a "0" appears if disabled.
To disable the message, you must press one of the arrow keys so that a
"0" appears in the right window. Then press SELECT to save prior to
exiting. To exit, press STOP.
52
GENERAL