Villaware FPVLFPSL01 - Manual (Page 6)

5
instructions for use
BEFORE USING YOUR FOOD PROCESSOR
Follow the assembling instructions listed below before using your Villaware
™
Food Processor:
BE SURE THAT THE ELECTRIC CORD IS UNPLUGGED.
THE BLADES AND DISCS ARE EXTREMELY SHARP. USE CAUTION WHEN
HANDLING THEM.
• Before assembling your
food processor , make
sure it is unplugged and
placed on a dry , level
surface. Place the bowl,
without the cover , over
the drive shaft on the
motor base. (Figure 1)
• If you are going to use
one of the discs, place
the attachment rod over
the drive shaft (figure
4a). Then place the disc
on top of the attachment
rod with the desired
side facing up (slicing,
shredding or grating)
(figure 4b).
• Attach the cover onto
the bowl so that the
food chute is in front
of the bowl above the
switch control (Figure 5).
Turn counter clockwise
until the arrow on the
cover is aligned with the
locked symbol on the lid
“ ”.
• Rotate the bowl until it
fits evenly on the base.
Hold handle and turn the
bowl counter clockwise
until it locks firmly into
place (Figure 2). The
handle will be facing
forward and aligned with
the switch control. Make
sure the arrow on the
base is aligned with the
locked symbol “ ”.
• If you are going to use
the chopping blade; place
it over the drive shaft,
rotating it slightly until it
drops into place (Figure 3).
THE BLADES AND
DISCS ARE SHARP.
USE CAUTION WHEN
HANDLING THEM.
Figure 4a
Figure 1 Figure 2 Figure 3
Figure 5 Figure 6
• Push down on food
pusher lid until it clicks,
indicating that the cover
is locked into place.
Figure 4b
NOTE: Each time you re-assemble your food processor , be sure to attach the bowl first
and lock it into position . Then attach the cover.