Vision Fitness X6200 - Manual (Page 51)

47
GENERAL
DEFAULT SETTINGS
(X6100 ONLY)
Use this optional USER SET Mode to set default values or view
accumulated variables.
ENTERING AND USING USER SET MODE
• Press and hold the UP ▲ and DOWN ▼ buttons simultaneously for
five seconds.
• You will hear a series of beeps and the display will read USER SET.
You are now in USER SET Mode.
SETTING DEFAULT WORKOUT TIME
• Press START to change Default Time.
• The TIME (top left) window will be flashing the current default time.
Use the UP ▲ and DOWN ▼ buttons to change to your desired
default time.
• To save changes, press and hold START for approximately three
seconds.
• Push ENTER to go to Default Level.
SETTING DEFAULT RESISTANCE LEVEL
• The LEVEL (top right) window will be flashing the default resistance
level. Use the UP ▲ and DOWN ▼ buttons to change to your
desired default level.
• To save changes, press and hold START for approximately three
seconds.
• Press and hold ENTER for approximately three seconds to exit
default setting mode.