Vision Fitness X6200 User Manual
Page 54
50
GENERAL
TROUBLESHOOTING
Our Elliptical Trainers are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps may reveal the
cause.
PROBLEM: The console does not light up.
SOLUTION: Check to make sure the power switch located on the
backside of the console is turned on.
SOLUTION: Make sure the power adapter is plugged into the base of the
Elliptical Trainer.
SOLUTION: Make sure the wire harness is plugged into the back of the console.
PROBLEM: You feel a thump or hitch in the stride motion.
SOLUTION: Check assembly and tightness of all hardware.
SOLUTION: Wipe off the roller wheels. They could have taken on debris
that is causing the thump.
SOLUTION: Check the bolts and the bracket under the footplate. At times,
these can be over-tightened which cause friction to the pivoting footplate
and may lead to a thump or hitch.
NOTE:
If the above steps fail to remedy the problem, discontinue use, turn
the power off and contact your retailer.