Vanguard Managed Solutions Vanguard 342 - Manual (Page 80)

3-26 Installation and Replacement
Modifying Your Vanguard 342
Procedure for
Removing the
Motherboard Use the steps to remove the Vanguard 342 motherboard:
Procedure for
Installing the
Motherboard Use the steps to install the Vanguard 342 motherboard:
Step Action
1 Remove the power cord and cables from the back of the unit.
2 Remove the two screws on either side of the chassis at the rear of
the unit.
3 Use the handle on the right side of the front panel to carefully slide
out the motherboard.
4 Place the motherboard on a clean flat surface.
Step Action
1 Carefully slide the motherboard into the card guides within the
opening.
2 Push the motherboard into the enclosure.
3 Tighten the screws on both sides of the chassis. Be sure the screws
are snug.
4 Reconnect the cables and power cord.