Vanguard Managed Solutions Vanguard 342 - Manual (Page 91)

Powering Up and Loading Software 4-3
Powering Off The Vanguard 342
Powering Off The Vanguard 342
Warning When powering down the unit, always unplug the power cord from the AC power
outlet first (Figure 4-1). Never disconnect or reconnect the power connector from the
Vanguard back panel if the power supply is still connected to the AC power outlet
(Figure 4-2). Doing so can potentially damage the Vanguard unit.
Figure 4-1. Approved Practice for Powering Down a Vanguard Unit
Figure 4-2. Unacceptable Practice for Powering Down or Powering Up a
Vanguard Unit
Disconnect
from Power Outltet
Power Connector
Power Cord
Power Outlet
Power Cord
Power Connector