Vidikron VP-5000 - Manual (Page 19)

Controls and Functions
Vidikron PlasmaView Owner’s Operating Manual 9
PRE
L
IMINAR
Y
1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. POWER ON/OFF
Use these buttons to turn the PlasmaView on or off. (This does not operate when the
POWER/STANDBY indicator of the main unit is off.)
3. CURSOR ( , , , )
Use these buttons to select items or settings, adjust settings or switch display patterns.
4. EXIT
Press this button to exit the OSD controls in the main menu. Press this button during the
display of a submenu to return to the previous menu.
5. MENU
Press this button to access the On-Screen Display (OSD) controls. Press this button
during the display of the main menu to go to a submenu. Also used to select a
highlighted menu item or confirm a changed setting.
6. VID 1-2
Press this button to select VIDEO 1 as the source. Press it again to select VIDEO 2.
7. DVD-HD 1-4
Press this button repeatedly to select a DVD/HD source.
8. RGB
Press this button to select the PC/RGB input as the source.
9. ASPECT
Press this button to select an aspect ratio. (Not active for all signals.)
10. MUTE
Press to mute the audio output. Press it again to restore the sound.
11. VOLUME (+/–)
Use these buttons to adjust the audio volume.
12. AUTO OFF
Press this button to set the sleep timer. Press it repeatedly to scroll through the available
options (30, 60, 90 or 120 minutes; or, select 0 to turn the timer off).
13. DISPLAY
Displays the currently-selected aspect ratio and input on the screen.
14. LIGHT
Press to illuminate the buttons.