Vidikron VP-5000 - Manual (Page 44)

Operation
34 Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
V Shift: Use the up- or down-arrow buttons ( , ) to highlight V Position. Then, use the
right-arrow button ( ) to shift the image up; use the left-arrow button ( ) to shift the
image down.
H Shift: Use the up- or down-arrow buttons ( , ) to highlight H Position. Then, use the
right-arrow button ( ) to shift the image to the right; use the left-arrow button ( ) to shift
the image to the left.
V Size: Use the up- or down-arrow buttons ( , ) to highlight V Size. Then, use the
right-arrow button ( ) to increase the height; use the left-arrow button ( ) to decrease it.
H Size: Use the up- or down-arrow buttons ( , ) to highlight H Size. Then, use the
right-arrow button ( ) to increase the width; use the left-arrow button ( ) to decrease it.
Auto Adjust (available only on PC/RGB Input): To have the PlasmaView automatically
adjust the size, position, and quality of RGB computer images, select Auto Adjust from the
Image Options menu and set it to ON. To make these adjustments manually, set Auto Adjust
to OFF.
Fine Picture (available only on PC/RGB Input): Use the Fine Picture control to reduce or
eliminate flickering in the image.
Picture Adjust (available only on PC/RGB Input): Use the Picture Adjust control to remove
striped patterns from the displayed image.
CinemaFill CinemaFill scales (zooms in on) a 2.35:1
image linearly (by the same amount on all
sides) to fill a 16:9 display.
This eliminates the black bars above and
below the active image area. However,
some picture information on the sides is
lost.
Fine Picture and Picture Adjust are adjustable only when Auto Adjust is
set to OFF.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio Description
2.35:1 Image on
16:9 Display
2.35:1 Image on
16:9 Display with
Cinema Fill
Note