3 using the on-screen menus, Using the on-screen menus, Pre l iminar y – Vidikron VP-5000 User Manual
Page 33
Vidikron PlasmaView Owner’s Operating Manual
23
PRE
L
IMINAR
Y
4.3
Using the On-Screen
Menus
To use the on-screen menus:
1.
Press MENU to display the Main Menu.
2.
To select a menu item, use the up- or down-arrow buttons (
,
) on the remote
control to highlight it.
3.
Press MENU to access that menu.
4.
Use the up- or down-arrow buttons (
,
) to select the setting you want to change.
Then, press MENU.
5.
Press the right- or left-arrow button (
,
) to change that setting. (If you do not do this
within five seconds, the slidebar disappears.)
6.
To return to the previous menu, press EXIT. If the Main Menu is on-screen, pressing EXIT
hides the OSD menu.
The PlasmaView OSD menus are arranged hierarchically, as shown in Figure 4-2.
1. The native resolution of the VP-5000 is 1365 x 768. Other horizontal or
vertical resolutions may be scaled upward or downward to fit the
display.
2. With most computers, you can get the best picture at
1024 x 768 @ 60Hz.
3. The PlasmaView supports 36-bit color (68.7 billion possible colors).
To prevent image retention (burn-in) on your display, ALWAYS use a
screen saver and set it to the shortest possible time.
Note
WARNING
Depending on the selected input source and signal characteristics, some
menu options may not be available.
Note