Vidikron Vision 50 - Manual (Page 48)

Installation
36 Vidikron Vision 50 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
Once the proper lens angle has been set, firmly tighten the Yaw/Z-Adjustment Levers to
secure the lens in place.
Anamorphic Lens Installation
and Adjustment -
Vision 50/CineWide with
AutoScope
The Vision 50 Anamorphic lens mount kit consists of everything shown in Figure 3-17. Some
components shipped with your projector may differ slightly from what is shown in these
instructions.
Figure 3-17. Anamorphic Lens Mounting Assembly - Exploded View
➤
2
3
4
6
7
8
5
1
9
Pitch Adjustment Yoke for Lens
Height/Y Adjustment
T-Screw (2x)
T-Screw (2x)
Pitch Adjustment
Anamorphic Lens
Holder
1/4-20 Hex Bolt (2x)
and Washer (2x)
AutoScope Carriage Plate
Yaw/X Adjustment
Lever (2x)
Lens Adapter Ring and
Mounting Screws (3x)
Pitch Adjustment
T-Nut (2x)
10 Anamorphic Lens
Set Screw