Vidikron Vision 50 - Manual (Page 73)

Operation
Vidikron Vision 50 Series Owner’s Operating Manual 61
PRE
L
IMINAR
Y
Splash Screen Timer: Use the or button to set the Splash Screen Timer. This timer
controls how long the startup (ISF and Vidikron logo) image stays on-screen after you turn on
the projector. Select from 5 to 60 seconds, in one-second increments. When finished, press
EXIT.
ISF Enable: Select ISF Enable from the ISF Calibration menu to control the display of the ISF
logo on the Vision 50 splash screen upon power-up.
You can personalize the Vision 50 splash screen with the projector owner’s name and/or the
installer’s name. For instructions, refer to Appendix A.
Return to User OSD: To exit the ISF Calibration menu, use the up- or down-arrow keys to
highlight Return to User OSD and press ENTER.
To return to the ISF Calibration menu, select it from the Main Menu, press ENTER twice, then
press MENU on the remote control. (You do not need to re-enter the passcode.)