3. plasmaview model vp-6000 connector panel, Pre l iminar y – Vidikron VP-4200a User Manual
Page 18
8
Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
Figure 2-3. PlasmaView Model VP-6000 Connector Panel
1.
COMBINATION IN/OUT
Used to control multiple PlasmaView monitors collectively. Use a 6-pin, mini-DIN cable
(all pins wired straight-through).
2.
Not used.
3.
AUDIO (OUTPUT) (3.5-mm stereo mini jack)
Used to output the audio of the selected source component connected to the plasma
display to an AV amplifier or similar component. The output level is fixed.
4.
AUDIO (INPUT 1) (3.5-mm stereo mini jack)
Connect this jack to the audio output connector(s) of the device connected to INPUT 1.
5.
AUDIO (INPUT 2) (3.5-mm stereo mini jack)
Connect this jack to the audio output connector(s) of the device connected to INPUT 2.
6.
ANALOG RGB OUT (INPUT 1) (15-pin D-Sub)
If desired, connect this output to the RGB input of a second display device.
7.
ANALOG RGB IN (INPUT 1) (15-pin D-Sub)
For connecting components that have RGB or component output jacks such as a
personal computer or external DTV decoder (a break out cable is needed for BNC-type
connection).
This output is not active when the PlasmaView is off or in standby mode.
COMBINATION
IN
OUT
RS-232C
AUDIO AUDIO
INPUT1
AUDIO
OUTPUT
INPUT2
ANALOG RGB OUT
(D-Sub)
ANALOG RGB IN
(D-Sub)
INPUT1
DIGITAL RGB
(DVI-D)
INPUT2
RS-232
DVI VIDEO
COMPONENT
14
15
1
2
3 4 5
6
7
8
17
16
9
10
11
12
13
Note