Vidikron VP-4200a - Manual (Page 31)

Installation
Vidikron PlasmaView Owner’s Operating Manual 21
PRE
L
IMINAR
Y
Composite/S-Video (INPUT 3) Connections: The PlasmaView has S-Video and Composite
video inputs for connecting a VCR, camcorder, laser disc player, DVD player or other
standard-definition (480i) source. Connect such devices to INPUT 3 as shown in Figure 3-6.
To switch between the Composite and S-Video input, press the SELECT button between the
two connectors.
Figure 3-6. Composite or S-Video (INPUT 3) Connection
Use the DVI inputs whenever possible. This ensures the highest video
quality because the signal is carried in the digital domain throughout the
entire signal path, from source component output into the display.
1. For computer signal compatibility information, refer to
Computer/Video Signal Compatibility on page 69.
2. INPUT 2 supports the VESA Display Data Channel (DDC 2B) standard.
This standard provides “Plug and Play” capability; the display and a
VESA DDC-compatible computer communicate their setting
requirements, allowing for quick and easy setup.
In order for Plug and Play to work correctly, you must turn on the
PlasmaView before you turn on the connected computer.
You cannot switch from the Composite to the S-Video input (or vice versa)
using the remote control.
Tip
Note
Note
AV component
Press to switch between
Composite and S-Video input