Vidikron VP-4200a - Manual (Page 68)

Serial Communications
58 Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
CTPS05 43 54 50 53 30 35 – – Sets COLOR TEMP. to HIGH.
CTRS00 43 54 52 53 30 30 – – Sets CHROMA EE to OFF.
CTRS01 43 54 52 53 30 31 – – Sets CHROMA EE to ON.
DBLS01 44 42 4C 53 30 31 – – Sets BLACK LEVEL for INPUT 2 to LOW.
DBLS02 44 42 4C 53 30 32 – – Sets BLACK LEVEL for INPUT 2 to HIGH.
DNRS00 44 4E 52 53 30 30 – – Sets the VIDEO NR to OFF.
DNRS01 44 4E 52 53 30 31 – – Sets the VIDEO NR to LOW.
DNRS02 44 4E 52 53 30 32 – – Sets the VIDEO NR to MIDDLE.
DNRS03 44 4E 52 53 30 33 – – Sets the VIDEO NR to HIGH.
DSGS01 44 53 47 53 30 31 – – Sets PLUG/PLAY setting for INPUT 2 to
PC.
DSGS02 44 53 47 53 30 32 – – Sets PLUG/PLAY setting for INPUT 2 to
VIDEO.
MCDS01 4D 43 44 53 30 31 – – Sets COLOR SPACE to RGB (VIDEO).
MCDS02 4D 43 44 53 30 32 – – Sets COLOR SPACE to COMPONENT1
(YCbCr).
MCDS03 4D 43 44 53 30 33 – – Sets COLOR SPACE to COMPONENT2
(YPbPr).
MNRS00 4D 4E 52 53 30 30 – – Turns MPEG FILTER OFF.
MNRS01 4D 4E 52 53 30 31 – – Sets MPEG FILTER to LOW.
MNRS02 4D 4E 52 53 30 32 – – Sets MPEG FILTER to MIDDLE.
MNRS03 4D 4E 52 53 30 33 – – Sets MPEG FILTER to HIGH.
PUCS00 50 55 43 53 30 30 – – Turns FILM MODE OFF.
PUCS01 50 55 43 53 30 31 – – Turns FILM MODE ON.
SFTS01 53 46 54 53 30 31 – – Sets the SIGNAL FORMAT to Type1.
SFTS02 53 46 54 53 30 32 – – Sets the SIGNAL FORMAT to Type2.
SFTS03 53 46 54 53 30 33 – – Sets the SIGNAL FORMAT to Type3.
SFTS04 53 46 54 53 30 34 – – Sets the SIGNAL FORMAT to Type4.
SFTS05 53 46 54 53 30 35 – – Sets the SIGNAL FORMAT to Type5.
SFTS06 53 46 54 53 30 36 – – Sets the SIGNAL FORMAT to Type6.
Table 6-1. Serial Commands (continued)
Command Value Range
Description
ASCII HEX Minimum Maximum
Notes:
1. When making input-specific adjustments such as to image quality, screen position/size or audio
sub-volume, select the input you wish to affect before making such adjustments.
2. These settings are not stored in memory.