Vidikron Vision 90t - Manual (Page 21)

Controls and Functions
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 11
Input Selection Buttons: Use these buttons to select an input source directly or to enter
numeric characters, as follows.
12. VIDEO (1)
Press to select Composite video input as the source.
13. S-VID 1 (2)/ S-VID 2 (5) (S-Video)
Press to select an S-Video input.
14. COMP (Component) (3)
Press to select Component SD (480i/576i) video input as the source.
15. HD 1 (4) / HD 2 (7)
Press to select a HD (RGBHV or YPbPr component) input.
16. DVI 1 (6) / DVI 2 (8)
Press to select a Digital Video input.
Aspect Ratio Selection Buttons: Use these buttons to select an aspect ratio directly or to
enter numeric characters, as follows.
17. ANA (Anamorphic) (9)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
18. 4X3 (Standard 4:3) (0)
Scales the input signal to fit 4:3 display mode in the center of the screen.
19. LETBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen.
20. I-WIDE (IntelliWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
21. CINEMA
For viewing 2.35:1 source material.
22. SVC
Selects the IntelliWide 2.35 aspect ratio, used for viewing 16:9 source material on a 2.35:1
screen.