Vidikron Vision 90t - Manual (Page 40)

Operation
30 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
Main Menu The Main Menu is the starting point for accessing all projector functions.
(The Calibration and Service menus are hidden and not accessible until you enter a
passcode.)
Input Source From the Main Menu, select Input Source to choose a video signal source.
The active source is indicated by an arrow (➨) to its left; in the example at left, Composite is
the active source.
Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from
the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program
material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by a “
7
” to its left; in the example at left,
Anamorphic is selected.
Vidikron 100
Input Source
Aspect Ratio
Picture
Input Position
ISF Presets
Information
Calibration
Service
➤
Input Source
➨ Composite
S-Video 1
S-Video 2
Component SD
HD/RGB 1
HD/RGB 2
DVI 1
DVI 2
➤
Aspect Ratio
7
Anamorphic
Standard 4:3
Letterbox
IntelliWide
Cinema
IntelliWide 2.35
➤
The aspect ratio selection is automatically saved for each input and
resolution.
Note