Vidikron Vision 90t - Manual (Page 30)

Installation
20 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
3.4
Installing the Optional
CineWide Lens If you are installing a Vision 90t/100t with the optional CineWide or CineWide with
AutoScope system, install the secondary anamorphic lens in accordance with the
instructions provided with the lens installation kit.
3.5
Mounting the Vision
90t/100t There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another.
Floor Mounting (Upright) In typical front and rear screen installations, the projector can be mounted to a secure and
level surface such as a table or cart. Carts are useful when moving a projector during a
presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it
from being moved during a presentation.
Ceiling Mounting (Inverted) For fixed installations, and for those that want the projector out of sight or have a limited
space for projector and audience, you can invert the Vision 90t/100t and suspend it from the
ceiling using a specially-designed ceiling mount fixture.
The projector can also be inverted and placed in an enclosure above and behind the viewing
area. Install four feet on the inside bottom surface of the enclosure on which the projector
can rest. A variety of materials can be used for this purpose (for example, rubber crutch tips
or turntable feet).
Adjusting the Projection
Angle
If the Vision 90t/100t is ceiling-mounted and the screen is significantly lower than the
projector, you can tilt the projector at a slight angle by adjusting the ceiling mount.
If you do this, you may need to shift the image using the on-screen display (OSD) controls, to
compensate. For detailed instructions, refer to Using the On-Screen Menus on page 28.
➤
➤
Use only the Vidikron-approved ceiling mount kit designed for your
projector. Install the mount kit according to the instructions provided
with it.
Note
➤