2 quick setup, Table 3-1 . installation overview, Quick setup – Vidikron Vision 90t User Manual
Page 24
14
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
3.2
Quick Setup
Table 3-1 gives a quick overview of the Vision 90t/100t installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details,
Refer to page...
1
Choose a location for the projector
2
Install CineWide (secondary anamorphic) lens (optional)
3
Connect signal sources to the projector
4
Connect external controller to RS-232 port (optional)
5
Connect other home theater components to 12-volt trigger
outputs (optional)
6
Apply power to the projector
7
For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
8
Lens adjustments: projected image size (zoom), position
(shift) and focus
9
Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
Note