Rs-232 controller connection, Figure 3-10 . rs-232 control system connection, 10. rs-232 control system connection – Vidikron Vision 90t User Manual
Page 35: 2 transmit data 3 receive data 5 ground, Mm mini plug to autoscope lens motor
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
25
RS-232 Controller
Connection
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation
system (if present) to the RS-232 CONTROL port on the Vision 90t/100t; see Figure 3-10.
For more information about using this connection, refer to Serial Communications on
page 49.
Figure 3-10. RS-232 Control System Connection
Connecting 12-Volt Trigger
Outputs to External Theater
Equipment
If your Vision 90t/100t is equipped with a CineWide with AutoScope system, use the cable
supplied with the AutoScope Lens Motor to connect the motor to a 12-Volt trigger output as
shown in Figure 3-11.
Figure 3-11. Connecting a 12-Volt Trigger Output to the AutoScope Lens Motor
COMPONENT VIDEO
Pb
Pr
Y
COMPONENT VIDEO
Y
Pr
Pb
VIDEO
VIDEO
S-VIDEO 2
S-VIDEO 2
S-VIDEO 1
S-VIDEO 1
RS-232
CONTROL
RS-232
CONTROL
IR
IR
1
2
3
1
2
3
TRIGGERS
TRIGGERS
1
2
3
4
5
7
8
9
6
to Automation/
Control System
or PC
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)
Pb
Pr
Y
Video
3
IR
RS-232 Control
S-Video 1
S-Video 2
1
2
TRIGGERS
RS-232 Out
Component Video
3.5-mm
mini plug
to AutoScope
Lens Motor