Declaration of conformity, Series ez zone pm, Watlow winona, inc – Watlow Electric Integrated Controller User Manual Rev C EZ-ZONE PM User Manual

Page 78

Advertising
background image

Wa t l o w E Z - Z O N E

®

P M I n t e g r a t e d C o n t r o l l e r

7 6

A p p e n d i x

Declaration of Conformity

Series EZ Zone PM

Watlow Winona, Inc.

1241 Bundy Blvd.
Winona, MN 55987 USA


Declares that the following product:
Designation:

Series EZ Zone PM (Panel Mount)

Model Numbers:

PM (3 or 6)(Any letter or number) – (1, 2, 3 or 4)(A, C, E, F or K)
(A, C, H, J or K)(Any letter or number) – (Any letter or number)
(A, C, E, F or K)(A, D, J or K)(Any two letters or numbers)

Classification:

Temperature control, Installation Category II, Pollution degree 2

Rated Voltage and Frequency:

100 to 240 V~ ac 50/60 Hz or 15 to 36 V

t dc/24 V~ ac 50/60 Hz

Rated Power Consumption:

10 VA maximum.

Environmental Rating:

Front Panel IP66


Meets the essential requirements of the following European Union Directives by using the relevant
standards show below to indicate compliance.

2004/108/EC Electromagnetic Compatibility Directive

EN 61326

1997

A1:1998
A2:2002

Electrical equipment for measurement, control and
laboratory use – EMC requirements (Industrial Immunity,
Class B Emissions

EN 61000-4-2

1996

A1, A2, 2001

Electrostatic Discharge Immunity

EN 61000-4-3

2002

A1, A2, 2005

Radiated Field Immunity

EN 61000-4-4

2004

Electrical Fast-Transient / Burst Immunity

EN 61000-4-5

1995

A1, A2, 2001

Surge Immunity

EN 61000-4-6

1996

A1,A2,A3, 2005 Conducted Immunity

EN 61000-4-11

2004

Voltage Dips, Short Interruptions and Voltage Variations
Immunity

EN 61000-3-2

2000

ED.2.

Harmonic Current Emissions

EN 61000-3-3

1

1995

A1, A2, 2002

Voltage Fluctuations and Flicker

1

For mechanical relay loads, cycle time may need to be extended up to 30 seconds to meet flicker

requirements depending on load switched and source impedance.

73/23/EEC Low-Voltage Directive

EN 61010-1

2001

Safety Requirements of electrical equipment for measurement, control
and laboratory use. Part 1: General requirements

Compliant with 2002/95/EC RoHS Directive

2002/96/EC WEEE Directive

Equipment Requires Recycling


Raymond D. Feller III

Winona, Minnesota, USA

Name of Authorized Representative

Place of Issue


General Manager

August, 2007

Title of Authorized Representative

Date of Issue




Signature of Authorized Representative

Declaration of Conformity

Advertising