Whirlpool ADVANTECH CL-8 - Manual (Page 106)

Quick Reference
97
ADVANTECH
™ System Quick Reference Sheet
Cut out this quick reference sheet and give to your service
persons to take with them when they go to retrieve machine
audits.
ADVANTECH ™ System Quick Reference Sheet
Aiming the PDA (continued)
Aim the handheld much like you would aim a TV remote control. Be
sure to hold the PDA at a ninety-degree angle to the machine’s control
panel. To ensure successful data transmission, make sure the distance
between the PDA and the machine is six inches or less. Strong sunlight
or the use of other infrared devices such as alarm systems may inhibit
the transmission of data. To remedy this situation, simply use your
hand to shade the receiver or the PDA.
Taking a Machine Audit
1. Aim the handheld at the laundry machine’s receiver.
2. Tap on Get Audit, located on the Select a command screen on
the PDA.
3. When the Audit is complete a checkmark should appear next to
all items listed on the screen. Tap on Back to return to the Select
a command screen.
4. Repeat steps 1-3 to take audits from additional machines.
Important:
If all items on the Get Audit screen are checked, then the operation
was a success. If some items are not checked, then the communication
has failed. In the event of a failed audit, tap the Back button, check
your aim of the PDA in relation to the control panel on the laundry
machine, and perform steps 1-3 again.
2