Whirlpool ADVANTECH CL-8 - Manual (Page 52)

Data exchange between PDA & Machine
43
Hint:
An easy way to keep track of machine names is to
begin with the first machine to your left as you enter a
location and work clockwise around the room, or
physically mark the machine with a property tag or
magic marker.
4. When initialization is complete the screen will
display Operation completed. Tap on Back to
return to the Select a command screen.
Using the Send Setup Command
The
Send Setup command transfers a washer or
dryer template, created in the Management Software,
to a machine.
1. Aim the infrared port on the PDA at a 90 degree
angle to the machine’s receiver.
2. Tap on Send Setup, from the Select a
command screen on the PDA.
3. Select the appropriate Setup Template, then tap
on Send.