Whirlpool ADVANTECH CL-8 - Manual (Page 34)

ADVANTECH ™ Management Software Setup
25
Setting the Access Control Password
The
Access Control Password is used in
conjunction with the Owner ID to protect your
machines from unauthorized user access. Unlike the
Owner ID, the Access Control Password can be
changed.
Important:
If a service person loses a PDA, it is recommended
that you change your
Access Control Password
immediately, re-sync all of your PDAs, and re-initialize
all of your machines to install the new password.
1. Select
Passwords, Set Access Control
Password from the menu.
2. Enter the New Access Control Password in the
dialog box and press [Tab].
3. Enter
the Access Control Password again to
confirm, then click on Enter.
4. Click on OK.
Note:
The Access Control Password is case
sensitive.