Whirlpool ADVANTECH CL-8 - Manual (Page 63)

Audits
54
Once a machine template has been created, the
information has been downloaded to the PDA via the
HotSync
® process, and audits have been taken,
information about specific machine templates can be
viewed in the Management Software. This information
resides on the
Existing Machines tab of the
Machine Setups dialog box.
This view is helpful to see which template each
machine is using or service information for diagnosing
service issues. The machine ID number and whether
or not any manual setups have been set on the
machine can also be viewed.
Viewing an Existing Machine
1. Select the correct location from the Location:
drop-down list.
2. Click on Setups.
3. The Machine Setups dialog box appears.
4. Click in the Existing Machine tab.
5. Choose the machine you would like to view from
the Select a machine: drop-down list.
Deleting an Existing Machine
If a certain machine is taken out of service or moved
to a new location, you could delete it.
1. Within the Machine Setups dialog box, click on
the Existing Machine tab.
2. From the Select a Machine: drop-down list,
choose the machine to be deleted.
3. Click on Delete, located in the lower
right corner.
4. Click on Yes.
Important:
Deleting an existing machine will delete all audit,
machine, exception, and service data associated with
the machine.
5. Click on OK.