Whirlpool ADVANTECH CL-8 - Manual (Page 17)

ADVANTECH ™ Management Software Installation
8
Installing ADVANTECH ™ Management Software
The Management Software is used to interpret audit
data collected from your ADVANTECH
™ commercial
laundry products. It must be installed before the
Handheld Software can be downloaded to the Palm
™
handheld. The Management Software and the
HotSync
® Manager must be loaded and operating
prior to attempting a PDA data transfer.
1. Power on the PC, if not done so already.
2. Place the ADVANTECH
™ Management Software
CD into the CD drive.
3. The InstallShield Self-extracting EXE window
appears.
Important:
Windows
® 95 users MUST click on NO, and then
install DCOM95 before proceeding with installation of
the ADVANTECH ™ Management Software.
See page 11 for the DCOM95 install instructions.
If you are using an operating system other than
Windows
® 95, such as Windows ® 98, Windows
NT ® , Windows ME ™, Windows ® 2000, Windows ®
2000 Professional, or if you are using Windows ®
95 and have already installed DCOM95, click on
Yes to continue with the installation.
4. The InstallShield Self-extracting EXE and
Setup windows will appear briefly. When the
Welcome window appears, click on Next to
proceed.
5. Click on Next again.
6. Read the Software License Agreement then in
order to precede you must accept the terms by
clicking on
Yes.
7. Click on Next again.
8. The Select Program Folder window appears. To
accept the default folder location (Advantech)
click on
Next.