Western Digital 4CH TRIPLEX - Manual (Page 26)

SENSOR – Press button to set <ON> or <OFF>.
<ON>: Video will be recorded when the sensor is activated.
Please refer to “4-3-3-3. SENSOR Setup”.
MOTION – Press button to set <ON> or <OFF>.
<ON>: Video will be recorded when the motion is detected.
Please refer to “4-3-3-4. MOTION Setup ”.
MANUAL - Press button to set <ON> or <OFF>
<ON>: Video will be recorded when the user press RECORD button.
CONTINUOUS - Press button to set <ON> or <OFF>
<ON>: Video will be ALWAYS recorded when DVR is in operation.
AUDIO – Move the cursor on the one of <1>, <2>, <3>, and <4> audio inputs and
press SEL button to select the audio port that will be recorded. The selected audio
channels will be highlighted in Yellow.
4-3-3-3. SENSOR Setup
In MUX screen, select SENSOR to go to SENSOR setup screen.
5 seconds of Pre-Record will be applied to all channels as default.
SENSOR NUMBER – Press button to select sensor that one want to set and
link with recording channel.
TYPE - Press button to select the type of sensor to be activated
Select the right sensor type according to the type of installed sensor with DVR.
NORMAL OPEN – Normal Open type sensor
NORMAL CLOSE – Normal Close type sensor
ALARM - Press button to select the port on which an alarm out is made
26