Western Digital 4CH TRIPLEX - Manual (Page 52)

5-7-3. Still image Backup in USB flash memory stick
1. Connect an USB flash memory stick into USB port.
2. Select the still image that you want to backup in an USB flash memory stick. Please
refer to “5-8-2. Viewing Captured Image”.
3. Press SEL button. Then the still image will be stored in an USB flash memory stick.
NOTICE
Please contact to the supplier or installer of DVR in order to confirm the compatible models of
USB flash memory stick.
5-8. PTZF
5-8-1. PTZF Operation
To control the PTZF functions of the camera, connect the controller to the RS-485 port.
For speed dome cameras that supports RS-485, connect them directly to the RS-485 port. But if
the camera is controlled with RS-232C, one needs to use Signal Converter (RS-485 to RS-232C).
1. In PTZ from the SETUP menu, set the protocol type of the camera for the channel you
wish to control to be the same as the camera that is installed. If the camera has a specific
camera ID, move the cursor on the field of <Camera ID> and select the camera ID using
buttons.
2. Press the MISC button in triple to go to the screen where PTZF can be adjusted.
52