Western Digital 4CH TRIPLEX - Manual (Page 59)

5-11-2. Deleting Region
1. Select INDIVIDUAL for REGION in the MOTION menu and press SELECT button to go
to Motion Region Setting screen.
2. From 1. GREEN 2. ORANGE 3. MINT 4. VIOLET, select the region you wish to delete.
Place the cursor on “2.DELETE” and press SEL button. When DVR asks “Do you Delete
This Region Data?” select “YES” to delete the selected region. A mode for setting a new
region will proceed.
5-12. Audio
5-12-1. Audio Setup and Connection
1. Connect the audio input and audio output cable to the audio connection port on the back
of DVR.
2. In CHANNEL menu of MUX menu, select the desired audio input channel for each video
channel by highlighting it yellow.
3. When recording by sensor, motion detection, manual or schedule begins, on a channel
that the audio is linked to, audio recording begins automatically.
59