Western Digital 4CH TRIPLEX - Manual (Page 40)

4-6. PTZ
In order to use the PTZF function, the same camera type as the PTZF camera that is connected
to the chosen channel should be selected as follows.
1. Select DEVICE and press SEL button to show DEVICE setup menu.
2. On the field of <PTZ Channel>, select the channel on which you wish to change the
PTZF type of the camera. The field of <Camera Type> will show the camera type that is
currently selected for that channel.
3. After selecting the channel, move the cursor to the field of <Camera Type> using
buttons. Select the camera type, using buttons.
4. If the camera has a specific camera ID, move the cursor on the field of <Camera ID>
and select the camera ID using buttons.
4-7. NETWORK
Select NETWORK from the SETUP menu and press SEL button to go to NETWORK setup
screen.
4-7-1. CLIENT ACCESS
The access from NETWORK CLIENT S/W can be turned off.
<OFF> - The access between NETWORK CLIENT S/W and the system will be blocked up.
40