Western Digital 4CH TRIPLEX - Manual (Page 30)

4-4. SYSTEM
Select SYSTEM and press SEL button to go to SYSTEM setup menu.
4-4-1. ADMIN PASSWORD
ADMIN PASSWORD can be edited here.
1. Place the cursor on “Select” in the field of ADMIN PASSWORD and press SEL button.
2. CURRENT PASSWORD: Enter the current password using 1,2,3, and 4 and press SEL
button.
3. NEW PASSWORD: Enter a new password using 1,2,3, and 4 and press SEL button.
4. CONFIRM PASSWORD: Retype the new password and press SEL button to confirm the
new password. When “Password Changed” appears as bellow, press “YES” using SEL
button to confirm the change.
The factory default password is “1111”.
To delete password, just press SEL button without typing any numbers in the NEW
PASSWORD and CONFIRM PASSWORD field.
Applied region and authorization of ADMIN PASSWORD & USER PASSWORD
ADMIN – All setting changes and other features are accessible
USER – Making setup changes and turning off the power is disallowed
The user can make Password (ADMIN PASSWORD & USER PASSWORD) ONLY using the
numbers of “1”, “2”, “3”, and “4”. The available figures of the password (ADMIN PASSWORD
& USER PASSWORD) are 8 figures.
30