Western Digital 4CH TRIPLEX - Manual (Page 73)

7-6. SETUP
Press the SETUP button on the upper right of GUI to go to remote DVR SETTING menu.
7-6-1. RECORD
A. SELECT MODE
You can select your recording mode here; the selected mode is inversed.
MUX – Record in MUX mode (inversed during MUX recording)
QUAD – Record in QUAD mode
SCHEDULE – Record in SCHEDULE mode
Please refer to “4-3-1. Selecting Recording Mode (QUAD, MUX, SCHEDULE)”.
B. MUX SETTING
RESOLUTION: Select from 720 X 480 and 360 X 240
QUALITY: Select quality among LOW / NORMAL / HIGH
AUDIO: Setup Volume Control and INPUT GAIN
CH1 / CH2 / CH3 / CH4
CHANNEL
FRAME RATE: Select recording frame rate
RECORDED BY: SENSOR, MOTION, MANUAL
RECORD AUDIO: NONE, 1, 2, 3, 4
NET FRAME DROP
MOTION
FULL MOTION REGION: Full-screen Motion Detect Mode
SET REGION: Inversed when motion detection region is being setup
RELAY OUTPUT - ALARM: Select alarm
73