Yamaha DM2000 - Manual (Page 130)

130
Chapter 12—Common Channel Functions
DM2000 Version 2—Owner’s Manual
Metering the Stereo out
The Stereo Out can be metered on the Stereo Meter page. Peak signal levels for the left and
right channels are displayed numerically.
Attenuating Signals
Input Channels, Bus Outs, Aux Sends, Matrix Sends, and the Stereo Out all feature pre-EQ
attenuation, which is useful for attenuating “hot” signals before EQ’ing.
Using the SELECTED CHANNEL EQUALIZER ATT Control
1 Use the LAYER buttons to select Layers, and use the [SEL] buttons to select
channels.
2 Use the ATT control to set the amount of attenuation.
Attenuator Pages
Attenuator settings can be viewed and set on the Attenuator pages.
1 Use the EQUALIZER [DISPLAY] button to select the Attenuator pages.
The Attenuator parameters for the 96 Input Channels are arranged into four pages. The
Input Channel 1–24 Attenuator/Shifter page is shown below. The layout of the other three
pages is the same.
ATT.