Yamaha DM2000 - Manual (Page 135)

Grouping Output Channel EQs
135
DM2000 Version 2—Owner’s Manual
Grouping Output Channel EQs
The Bus Out, Aux Send, Matrix Send, and Stereo Out EQs can be grouped, allowing you to
control the EQ of several Output Channels simultaneously. There are four Output Channel
EQ groups: e, f, g, and h.
1 Use the DISPLAY ACCESS [GROUP] button to locate the Output Equalizer
Link page.
2 Press the LAYER [MASTER] button.
3 Use the Up/Down cursor buttons to select EQ groups e–h.
The selected group is highlighted by a flashing cursor box.
4 Use the [SEL] buttons to add and remove Output Channels to and from the
selected group.
The EQ settings of the first Output Channel added to the group are applied to all subse-
quently added Output Channels.
When an Output Channel is added to a group, its [SEL] button indicator lights up.
Using Inserts
Input Channels, Bus Outs, Aux Sends, Matrix Sends, and the Stereo Out all feature assign-
able Inserts.
Using the SELECTED CHANNEL PHASE/INSERT [INSERT ON] Button
1 Use the LAYER buttons to select Layers, and use the [SEL] buttons to select
channels.
2 Use the [INSERT ON] button to turn the currently selected channel’s
Insert on or off.
INSERT ON