Yamaha DM2000 - Manual (Page 214)

214
Chapter 17—Automix
DM2000 Version 2—Owner’s Manual
Event select buttons: These buttons are used to select the type of events to be displayed
in the event list.
INSERT button: This button is used to insert new events. Use the Event select buttons to
select the type of event that you want to insert. Use the Captured timecode counter to spec-
ify the point at which you want to insert the new event. Select the INSERT button, and then
press [ENTER].
LOCATE button: This button is used to locate events at the Capture memory display
position.
Capture memory display: This displays the captured timecode position. The captured
timecode values can be edited by using the Parameter wheel or the INC/DEC buttons. Press
the [ENTER] button to reset the currently selected digits to “00.”
CAPTURE button: This button is used to capture the current timecode position. Up to
eight timecode values can be captured and stored in the eight Capture memories. Use the
cursor buttons to select the Capture memory number, and use the Parameter wheel or the
INC/DEC buttons to select the Capture memories. Capture memories can be selected even
while the CAPTURE, LOCATE, or INSERT button is selected.
If the Auto Inc TC capture preference is on (see page 277), Capture memories increment
automatically each time a timecode position is captured.
If the Link Capture & Locate Memory preference is on (see page 277), the eight Capture
memories are linked to the eight Locate memories so that, for example, edits made to Cap-
ture memory #1 are reflected on Locate memory #1, and vice versa.
Button Events Listed List Format
SCENE/LIB Library and Scene recall events TIME CODE, CH, SCENE/LIB
FADER
Channel faders (Inputs Channels, Bus Out masters,
Aux Send masters, Matrix Send masters, Group mas-
ter levels, and the Stereo Out) TIME CODE, CH, dB, SEC
ON Channel Mutes (ON/OFF) TIME CODE, CH, ON/OFF
PAN Pan TIME CODE, CH, L-C-R
SURR-PAN Surround pan TIME CODE, CH, SURR
SURR-LFE Surround LFE TIME CODE, CH, dB
SURR-DIV Surround DIV TIME CODE, CH, DIV
SURR-RDIV Surround RDIV TIME CODE, CH, DIV
EQ-ON EQ ON/OFF TIME CODE, CH, ON/OFF
EQ-FREQ EQ Frequency TIME CODE, CH, BAND/Hz
EQ-Q EQ Q TIME CODE, CH, BAND/Q
EQ-GAIN EQ Gain TIME CODE, CH, BAND/dB
AUX Aux/matrix Send 1–12 levels TIME CODE, CH, AUX, dB
AUX ON Aux/matrix Send 1–12 mutes TIME CODE, CH, AUX, ON/OFF