3 operating basics, Connecting the power cord, Turning on & off the dm2000 – Yamaha DM2000 User Manual
Page 51: Ad the “operating basics” c, Operating basics
Operating Basics
51
DM2000 Version 2—Owner’s Manual
3 Operating Basics
Connecting the Power Cord
Connect the socket-end of the supplied power cord to the AC IN
on the rear panel of the DM2000. Connect the plug-end to a suit-
able AC wall outlet, one that conforms to the power supply
requirements stated on the DM2000’s rear panel.
Turning On & Off the DM2000
To prevent loud clicks and thumps in your speakers, turn on your
audio equipment in the following order (reverse this order when turn-
ing off)—sound sources, multitrack and master recorders, DM2000,
monitoring power amplifiers.
1
To turn on the DM2000, press the [POWER] switch.
The startup page appears for a while, and then the last selected display page appears.
2
To turn off the DM2000, press the [POWER] switch again.
Warning: Turn off all equipment connected to the DM2000 before making any power connec-
tions.