Yamaha DM2000 - Manual (Page 23)

Control Surface
23
DM2000 Version 2—Owner’s Manual
AUX SELECT
A AUX SELECT DISPLAY button
This button is used to select the following pages: Aux Send, Aux Send Pan, and Input Chan-
nel Aux View. See “Aux Sends” on page 110 for more information.
B AUX 1–12 buttons
These buttons are used to select Aux Sends when sending Input Channel signals to Aux
Sends. The button indicator of the currently selected Aux Send lights up. If the currently
selected Aux Send is paired, the indicator of its partner flashes. See “Aux Sends” on page 110
for more information.
Using these buttons along with the channel [ON] buttons enables you to turn Aux Sends on
and off (Mix Minus) (page 117).
Using these buttons along with the LAYER buttons enables you to copy the corresponding
channel levels to the Aux Send levels.
These buttons are also used to turn the Aux Out Solo function on and off when Aux/Solo
Link is turned on (page 142).
ENCODER MODE
The small text labels below the ASSIGN buttons apply to the DAW Remote Layer. See
“About Remote Layers” on page 253 for more information.
A ENCODER MODE DISPLAY button
This button is used to select the Encoder Mode Assign page. See “Selecting Encoder Modes”
on page 61 for more information.
B PAN button
This button is used to select the Pan Encoder mode. Its indicator lights up when this mode
is selected. In this mode, the Encoders function as Pan controls when an Input Channel
Layer is selected. When the Master Layer is selected, Encoders 21–24 function as Matrix
Send Balance controls. The other Encoders are inactive. See “Selecting Encoder Modes” on
page 61 for more information.
C AUX/MTRX button
This button is used to select the Aux/Mtrx Encoder mode. Its indicator lights up when this
mode is selected. In this mode, the Encoders function as Aux Send level controls when an
Input Channel Layer is selected. When the Master Layer is selected, Encoders 1–20 function
as Matrix Send level controls. See “Selecting Encoder Modes” on page 61.
AUX 2 AUX 1 AUX 3 AUX 4
AUX 6 AUX 5 AUX 7
AUX 10 AUX 9 AUX 11
AUX 8
AUX 12
AUX SELECT
DISPLAY
1
2
AUX/ MTRX PAN
ASSIGN 4 ASSIGN 3
DISPLAY
ASSIGN 2 ASSIGN 1
PAN SEND LEVEL
INSERT SEND ASSIGN OUTPUT INPUT
1
4
2 3
ENCODER MODE