Yamaha DM2000 - Manual (Page 206)

206
Chapter 17—Automix
DM2000 Version 2—Owner’s Manual
Parameter Recording
The following table summarizes parameter recording operation for each parameter. Param-
eter adjustments made on the respective display pages are also recorded.
Parameter Channel
OVER-
WRITE
Operation Pair/Group
Channel Levels
(faders)
Input
FADER
Set Layer to input, Fader mode to Fader,
use faders Faders of paired channels
and grouped faders are
recorded together
Bus Out, Aux Send,
Matrix Send Set Layer to Master, Fader mode to Fader,
use faders
Stereo Out Use Stereo Out fader
Group Master levels
Use faders assigned to Group Master in the
User Assignable Layer.
Channel Mutes
(ON/OFF)
Input
ON
Set Layer to input, use [ON] buttons [ON] buttons of paired
channels and grouped
mutes are recorded
together
Bus Out, Aux Send,
Matrix Send Set Layer to Master, use [ON] buttons
Stereo Out Use Stereo Out [ON] button
Group Master
On/Off Use [ON] buttons assigned to Group Mas-
ter in the User Assignable Layer.
Pan Input PAN
Set Layer to input, Encoder mode to Pan,
use Encoders If Pan mode is Gang or
Inverse-Gang, paired chan-
nels are recorded together.
Surround Pan Input SURR
Use Joystick (If a surround parameter is
assigned to the Encoders, also use Encod-
ers) If ST LINK button on Sur-
round Edit page is on, adja-
cent channels are recorded
together.
EQ (F, Q, G, On/Off)
Input, Bus Out, Aux
Send, Matrix Send,
Stereo Out
EQ
Use SELECTED CHANNEL EQUALIZER sec-
tion (If EQ parameter assigned to an
Encoder, also use Encoders) EQ of paired channels, and
grouped EQs recorded
together
Aux send 1–12 levels Input AUX
Use SELECTED CHANNEL AUX/MATRIX
SEND LEVEL controls (If Layer is input and
Fader mode is Aux/Mtrx, use faders. If
Layer is input and Encoder mode is
Aux/Mtrx, use Encoders) Aux send levels of paired
channels recorded
together. (If the selected
Aux Send is paired, the
send level to both Aux
Sends is recorded.)
Aux send 1–12 mutes Input AUX ON
Use SELECTED CHANNEL AUX/MATRIX
SEND [ON] buttons Aux send mutes of paired
channels recorded together
(If the selected Aux Send is
paired, mutes for both Aux
Sends recorded.)
Matrix send 1–4 levels
Bus Out, Aux Send
AUX
If Layer is Master and Fader mode is
Aux/Mtrx, use faders (If Layer is Master and
Encoder mode is Aux/Mtrx, use Encoders) Matrix send levels of paired
Bus Outs or Aux Sends
recorded together
Bus Out, Aux Send,
Stereo Out Use SELECTED CHANNEL AUX/MATRIX
SEND controls
Matrix send 1–4 mutes
Bus Out, Aux Send,
Stereo Out
AUX ON
Use SELECTED CHANNEL AUX/MATRIX
SEND [ON] buttons Matrix send mutes of
paired Bus Outs or Aux
Sends recorded together
Scene recalls — —
Use SCENE MEMORY section or Scene
Memory page
—
Library recalls
EQ, Gate, Comp,
Effects, Channel
—
Use corresponding library page
—
Effect parameters
(certain parameters) Effects processors
1–8
—
Use Parameter controls 1–4 (push to punch
in/out). Select the desired parameter on
the Effect Edit page, then press [ENTER]
—
User Defined Plug-Ins
(parameters 1–4)
Plug-Ins 1–8 —
Use Parameter controls 1–4 (push to punch
in/out). Select the desired parameter on
the Plug-in Edit page, then press [ENTER]
—
User Defined Remote
Layers
Faders FADER
Select User Defined Remote Layer, use fad-
ers
—
[ON] buttons ON
Select User Defined Remote Layer, use
[ON] buttons
—
Encoders PAN
Select User Defined Remote Layer, use
Encoder
—