Z Microsystems 18 - Manual (Page 12)

Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02
12
The three LED lights on the right of the
control panel are labeled A, B and C.
Their lighted functions are:
A -- Unused
B --- Picture-in-Picture (PIP) (green)
C -- Computer Graphics (green/
orange)
Green -- power and signal
Orange -- power and no signal
Off -- Standby mode
This section explains how to use the
Orion control buttons to adjust the
clarity of the display and image
position on the screen. In particular it
discusses:
• The function of each of the
push-button controls.
• How to reset previously saved
settings or return to factory
settings.
• Tips and techniques.
The Orion control buttons allow the
user to control image position, clarity
and backlight operations; to store
settings, and to revert to previously-
saved or factory-saved settings.
CONTROLS
Monitor