Install orion, Rear panel connectors – Z Microsystems 18 User Manual

Page 8

Advertising
background image

Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02

The Orion 18 mounts

directly to the rails of a

standard 19” RETMA

rack.

8

Install Orion

Bottom:
One picture-in-picture (PIP) RCA

connector,
One RCA connector for future use,

and
One 15-pin RGB VGA connector.

Power in connector is in the center.

Top:
One 9-pin connector for future use.
One 9-pin host SIO (serial input/

output) connector.

Use #10 Phillips screws

or equivalent.

Use four pan head 10-

32 screws to secure the

Orion 18 to the frame.

REAR PANEL CONNECTORS

Advertising