Monitor, On-screen menu accessing the menu system – Z Microsystems 18 User Manual
Page 13
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02
Monitor
13
ON-SCREEN MENU
ACCESSING THE MENU SYSTEM
Using the display controls:
If the display is blank, press the
Menu button on the Display
Controls. The Main Menu will be
displayed.
To change the highlighted line on
the Main Menu, push the Down or
Up button on the Display Controls.
When a function is highlighted,
push the Left or Right button to
adjust the functions value.
When a sub-menu is highlighted,
push the Menu button to enter the
sub-menu.
To return to the main menu, push
the Back button.
On each slider bar, there is a minimum possible value (gray number) showing
on the left side of the slider bar and there is a maximum possible value (gray
number) showing on the right side of the slider bar.
The current value is displayed as the last number on the right side of the slider
bar. Use the Left or Right buttons to adjust function to the desired value.
New user settings will be saved after exiting the Main Menu manually or by
exiting the Menu by automatic time out.
Sub Menus