Z Microsystems 18 - Manual (Page 6)

Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02
TOOLS REQUIRED
PRECAUTIONS
Required Tools and Equipment for
Mechanical Installation
• #2 Phillips screwdriver
In preparation to install the Orion,
take the following precautionary
steps:
• Turn off the electrical power to your
computer.
DANGER: To avoid shock hazard:
• Do not remove the covers
around the Orion.
• Do not connect or disconnect
the Orion during an electrical
storm.
• The power cord plug must be
connected to a properly wired
and grounded power outlet.
• Any equipment to which the
Orion will be attached must
also be connected to properly
wired and grounded power
outlets.
NOTE: For the fastest and easiest
installation of the Orion, follow
these steps in the sequence they
are presented.
6
Starting Point