Install orion, Remove protective lens – Z Microsystems 18 User Manual
Page 9
Advertising
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02
Install Orion
9
REMOVE PROTECTIVE LENS
The Orion 18 comes
with an optional
protective lens on front
of the screen, which is
used during shipping or
long storage.
To remove the protective
lens, slide the release
catch on the top of the
screen up.
While holding the
release catch up, slide
the protective lens to the
side.
Note: The protective
lens in front of the
screen may be used
during normal opera-
tions in situations where
dust or sand is airborne.
Advertising