Z Microsystems 18 - Manual (Page 17)

Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02
17
Troubleshooting
NO IMAGE ON DISPLAY What is the color of the Standby LED?
Black -- No power or in Standby
mode:
• Make sure the power cable is
plugged in.
• Connect the power cable to a
110 V outlet, which is turned
ON.
• Wake up the display by pressing
the Standby button.
Orange -- There is power, but no video
signal:
• Make sure the video cable is
plugged into the VGA Video
connector.
• Make sure there is video signal
coming out of the computer.
Green -- There is power and there is
video signal:
• Make sure the video signal
coming out from the computer
is not a black image.
• Possible hardware failure.
Contact Z Microsystems
Customer Support.