Zebra S4M - Manual (Page 42)

Operations
Load Media in Peel-Off Mode 36
13290L-001 Rev. A S4M User Guide 10/21/05
Load Media in Peel-Off Mode
This section applies only if the Peel-Off option is installed ( Figure 18 ).
Figure 18 • Peel-Off Mode
To load media in Peel-Off mode, complete these steps:
1. Set the printer to Peel-Off mode. See Select the Label Removal Method on page 63 for
instructions.
2. Insert the media in the printer. See Inserting Media into the Printer on page 31 for
instructions.
4
5
6
8 9 10
13
11
12
1
2
3
1 Peel lever 8 Dancer
2 Tear-off/peel-off bar 9 Media guide
3 Printhead assembly 10 Printhead release latch
4 Transmissive sensor 11 Peel assembly
5 Media supply guide 12 Label
6 Media supply hanger 13 Label liner
7 Liner take-up spindle